Water Filtration
Water Filtration System for Your Home
Choosing a water filtration system for a home is a plumbing service we offer. Whether you have city water or don’t have any running water, then you need a water filter that can be easily hooked up to a nearby spring or some other source of fresh water. Below are some water filtration systems for each scenario.
1. Under-Sink Water Filter
This is a filtration system that is attached to your kitchen sink. The water filtration system connects to your tap using a pipe and can filter your water before or after it reaches the main unit. The main advantage of this type of filtration system is that it’s very simple to install and hence very cost-effective. As much as this is one of the most affordable ways of filtering your water, its major disadvantage is that it isn’t effective for filters that are very big. Also, this type of filtration system can be very slow when filtering large amounts of water. In addition to this filter only working well with small amounts of water, they also can’t handle hard minerals such as calcium which tend to clog down the system.
2. Reverse Osmosis
This is a water filtration system that uses special membranes that are placed under pressure thereby separating the minerals, salts, and other harmful molecules from the water. You can get a number of these systems depending on the amount of water you have, the size or location of your home, and the kind of contaminant you wish to remove from your water. The main advantage of this filtration system is that it is effective in removing all sorts of contaminants, but its major disadvantage is that it takes up a lot of space. Just like with the under-sink water filter system, you have to ensure you have enough time to wait and also that the system can handle hard minerals such as calcium.
3. Whole House Water Filter
This is a filtration system for all your water sources – both under and above ground – in your home. One of the major advantages of the whole house water filter is that it is very effective, and it can cleanse large volumes of water in a short time. However, this type of filtration system can be quite a bit more than the above two methods.
Average 5-star reviews
Based on 75+ user reviews
Frequently Asked Questions.
You’ll find answers to common questions about our HVAC services. Our aim is to help you understand more about how we can assist with your heating, cooling, and air quality needs.
A whole house water filtration system is a device that is installed on your main water line that filters all of the water that enters your home. This means that every time you turn on the faucet, take a shower, or do laundry, the water is filtered, providing you with clean, fresh water throughout your entire home.
Water filtration systems work by removing impurities from your water supply. A carbon filter, which employs activated carbon to remove impurities from your water, is the most prevalent type of water filtration system. Carbon filters are very effective at removing a wide range of impurities, including chlorine, lead, and sediment. When the water passes through the carbon filter, the impurities are adsorbed onto the surface of the carbon, leaving you with clean, fresh water.
There are four main steps in the water filtration process: pre-filtration, adsorption, post-filtration, and disinfection.
- Pre-filtration is the first step and involves removing any large particles from your water, such as sediment or dirt.
- Adsorption is the second step and this is where the impurities are removed from your water by the carbon filter.
- Post-filtration is the third step and involves removing any remaining impurities from your water.
- Disinfection is the fourth and final step and this is where your water is treated with ultraviolet light or chlorine to kill any bacteria or viruses that may be present.
There is a wide range of filtration materials that can be used to filter water, but the most effective material for drinking water is carbon. Carbon filters are very effective at removing impurities from water, including chlorine, lead, and sediment. When the water passes through the carbon filter, the impurities are adsorbed onto the surface of the carbon, leaving you with clean, fresh water.
Installing a water filtration system is a relatively simple process. The first step is to find the main water line that enters your home and turn it off. Next, you will need to cut a section out of the main water line and insert the water filtration system. Once the system is in place, you will need to reconnect the main water line and turn it back on. Finally, you will need to flush the system by running the water through all of the faucets in your home.
Water filtration systems for household usage are plenty, but the optimum system relies on your unique requirements. If you are looking for a system that will filter all of the water in your home, then a whole house water filtration system is the best option. If you are only looking to filter the water from your kitchen sink, then a countertop or under-sink water filtration system would be a better option.